Ručni RFID čitačiBluetooth RFID čitači

R6UHF RFID sled čitač

Chainway R6 posebno je osmišljen za cjelovito jednodijelno rješenje s pametnim telefonom / PDA uređajem. U kombinaciji s pametnim telefonom i terminalom temeljenima na sustavu Android / iOS, lako se može pretvoriti u profesionalni uređaj za prikupljanje podataka. Izrađen s čipovima Impinj E Series i uz podršku za Impinj Gen2X, nudi snažnije UHF čitanje i pisanje koje omogućuje domet čitanja veći od 31m na otvorenom. RFID čitač ugodno leži u ruci, lako se odvaja i može obavljati zadatke u nadzornim ophodnjama energetike, cikličkom prebrojavanju odjeće, skladištenju, upravljanju imovinom, upravljanju voznim parkom, financijama itd.

Dimenzije: 151 x 76 x 132 mm / 5.94 x 2.99 x 5.19 in.
Težina: RFID configuration: 438 g (including battery) RFID + Engine configuration: 446 g (including battery)
Napajanje: Battery specification: 5200 mAh removable batteryStandby: over 70 hours (keeping bluetooth connected)Continuous use: up to 2.5 hours (UHF reading: 400 tags)Charging time:4-5 hours (with standard adaptor and USB cable)
Zujalica: Support
Sučelja: USB 3.0 Type-C
Indikatorska LED: Power, Work, Bluetooth

Pretvorite mobilni telefon u profesionalni uređaj za prikupljanje podataka

Fleksibilno pričvršćivanje i skidanje za brzu postavu

Podržava Android/iOS SDK

IP54

Izmjenjiva baterija 5200mAh

Bluetooth Low Energy (BLE) 5.0

Vlastito razvijen UHF modul temeljen na čipovima Impinj serije E

Impinj Gen2X za poboljšane UHF performanse

Brzina čitanja preko 1000 tagova/s

Opcijsko visokoučinkovito skeniranje barkodova

Fizičke karakteristike

Dimenzije	151 x 76 x 132 mm / 5.94 x 2.99 x 5.19 in.
Težina	RFID configuration: 438 g (including battery) RFID + Engine configuration: 446 g (including battery)
Napajanje	Battery specification: 5200 mAh removable batteryStandby: over 70 hours (keeping bluetooth connected)Continuous use: up to 2.5 hours (UHF reading: 400 tags)Charging time:4-5 hours (with standard adaptor and USB cable)
Zujalica	Support
Sučelja	USB 3.0 Type-C
Indikatorska LED	Power, Work, Bluetooth
Veličina prilagođenog telefona	Sled Reader: Width 68~80 mm, thickness ≤ 22 mmOthers: Based on phone case or holder
Materijal proizvoda	ABS, Aluminum Alloy
Boja	Black

Komunikacija

Bluetooth

Bluetooth Low Energy (BLE) 5.0

Razvojno okruženje

SDK	Android / iOS
Jezik	Java / Objective-C
Alat	Android Studio / Xcode

Radno okruženje

Radna temp.	-4℉~+122℉ / -20℃~+50℃
Temp. skladištenja	-40℉~+158℉ / -40℃~+70℃
Vlažnost	5%RH - 95%RH non condensing
Specifikacija pada	Multiple 1.5 m / 4.92 ft. drops to concrete across the operating temperature range
Specifikacija prevrtanja	1000 x 0.5 m / 1.64 ft. falls at room temperature
Brtvljenje	IP54 per IEC sealing specifications
ESD	±15 KV air discharge, ±8 KV conductive discharge

Skeniranje crtičnog koda

2D imager skener	SE2707
1D simbologije	UPC/EAN, Code128, Code39, Code93, Code11, Interleaved 2 of 5, Discrete 2 of 5, Chinese 2 of 5, Codabar, MSI, RSS,etc.
2D simbologije	PDF417, MicroPDF417, Composite, RSS, TLC-39, Datamatrix, QR code, Micro QR code, Aztec, MaxiCode; Postal Codes: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal, Dutch Postal (KIX), etc.
Napomena	*This function is optional

UHF RFID

Modul	Based on Impinj E Series chips
Frekvencija	FCC: 902 MHz – 928 MHz; 36 dBm (EIRP)EU: 865.6 MHz - 867.6 MHz; 35 dBm(EIRP)CH: 920.5 MHz- 924.5 MHz; 35 dBm (EIRP)
Impinj Gen2X	Supported
Protokol	EPC C1 GEN2 / ISO18000-6C
Antena	Circular Polarized Antenna
Izlazna snaga	1-30, step 1dB
Najbrža brzina očitavanja	1000+ tags/sec
Maks. domet očitavanja	>26m (Impinj M830 tag)
Napomena	* Ranges are measured in the open outdoors and low interference environment, and rate is measured in a laboratory low interference environment, they are affected by tags and environment.